Thread: got a procedure to unlock HTC Touch(Sprint)

I have got HTC P3050 (TELUS) I have got a procedure to unlock SPRINT TOUCH but anyone can tll me that it will work for TELUS TOUCH i want to use it in India it may be any network

here is the procedure:

I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.

The steps are simple:

Here is what you need to do:

1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)

THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.

DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS

21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.

31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.

32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.

33. Follow instructions to flash new OS to device.

34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.

Good luck.

Attached Files GetSPC.zip (60.9 KB, 116 views)

........ & then there's an easier way 2 do this

That one should NOT be posted in this section, that is for the GSM Touch, this section is for the CDMA Touch

thanks will try it out

I can't see the attack file. Any one tell me?

So, does the technique in Post 1 work with a Telus HTC Touch?

i have tried it for my telus and now i am using it in india on TATA network

Originally Posted by patelaquib

I have got HTC P3050 (TELUS) I have got a procedure to unlock SPRINT TOUCH but anyone can tll me that it will work for TELUS TOUCH i want to use it in India it may be any network

here is the procedure:

I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.

The steps are simple:

Here is what you need to do:

1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)

THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.

DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS

21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.

31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.

32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.

33. Follow instructions to flash new OS to device.

34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.

Good luck.

Attached Files GetSPC.zip (60.9 KB, 116 views)

I am trying to have a PPC6800 changed from Alltel to Sprint, this procedure should make that happen right? i was told that i need to change the CDMA and get a new esn before i can have it put on the Sprint network, does that sound right?

Yes u hav to do it but if sprint does not allow out of network ESN u will hav to get a ESN of working mobile on sprint and then program the same ESN PRL as well the MIN CODE from the active mobile on sprint if u got any pbl just reply me i will definately help u out